GRAPHITE plunge saw 1200 W is a precision device used for making cuts in materials such as wood, laminate or aluminum. The design of the saw-plunge cutter allows you to make plunge cuts anywhere in the material - without the need to start cutting from the edge, as is the case with traditional circular saws. The device works with cutting discs with a diameter of 165 mm and enables operation at a regulated speed in the range of 2200-5200 rpm. For better precision when making longer formatting cuts, it is recommended to use a guide rail, which is also included in the GRAPHITE offer. The maximum cutting thickness without a guide rail is 57 mm, while the slat is 52 mm. The device is equipped with a depth stop with a precise graduation and indicator, which allows you to easily choose the depth when working with or without the skirting board. The sawing-cutting deck is equipped with a slack adjustment system in relation to the guide rail and enables adjustment of the cutting angle in the range of 0-47 °. The blade guard is made of aluminum, and the entire side of the device has been profiled in such a way as to minimize the distance between the disk and the outer edge of the housing. This means that the minimum distance of the cutting line from an obstacle, eg in the form of a wall, is only 11.5 mm. The device is equipped with rotary chip discharge with the option of connecting a vacuum cleaner
